[Updated] Concept Product CP125-2 x E1.S SSD to PCIe 5.0 x 8 Removable SSD Mobile Rack for PCIe Expansion Slot

[icydock_admin]

Concept Product CP125
2 x E1.S SSD to PCIe 5.0 x 8 Removable SSD Mobile Rack for PCIe Expansion Slot

**Update (Aug 2025)**: We’ve updated the exterior design to reflect the latest improvements. Please see below for details.

Product Page: https://global.icydock.com/product_343.html
Any product suggestion or new idea will be highly appreciated!
​

---

Key Features​

• 
  • Fits 2 x E1.S NVMe SSD, compatible with 9.5mm thickness.
  • Uses 1x PCIe 3.0/4.0 x8 or x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x and x4, x4 for PCIe 8x is required to access both drives)
  • Supports hot-swap/hot-plug E1.S NVMe SSD.
  • Removable drive tray with tool-less drive installation for easy drive maintenance.
  • The eagle-hook lock system keeps the drive secured in the enclosure.
  • Equipped with a 50mm blower fan for maximum thermal performance.
  • The included thermal pad conducts heat from the drive to the metal drive tray.
  • Built-in individual drive power and activity LED light.
  • Optional HDD activity signal inputs let you transfer the drive activity signal to the computer case or LED panel.

​

 

[linuxquinonez]

I have a 2 E1S pm9A3 will fit on this model, looks great

 

[FreshFlash4096]

E1S pm9A3

Isn't the E1.S SKU of the PM9A3 over 9.5mm thickness because of the heatsink?

 

[linuxquinonez]

Isn't the E1.S SKU of the PM9A3 over 9.5mm thickness because of the heatsink?

It's 9.5mm exactly so it just fit or I'm wrong

 

[icydock_admin]

It's 9.5mm exactly so it just fit or I'm wrong

You may need to purchase PM9A3 E1.S without heatsink.

Also, if you could share with others about your intended application with PM9A3, it would be awesome.

 

[ookax]

This is great, industry is moving from m2 to e1 and have few e1 sticks where I need this.

One addition would be great, ability to disable the fan by jumper.

 

[icydock_admin]

This is great, industry is moving from m2 to e1 and have few e1 sticks where I need this.

One addition would be great, ability to disable the fan by jumper.

Thank for you the feedback! That is a good suggestion. We will relay this information to our Product Development Team.